Vertical Cuttings Dryer For Kosun Drilling Waste Management

Vertical Cuttings Dryer

Vertical Cuttings Dryer is a kind of vertical centrifuge which is also named as VERTI-G Cuttings Dryer. It is regarded as to one of the most effective waste management equipment for oil- or synthetic- based drilling operations.

Kosun Vertical Cutting Dryer is applicable for recovery oil from the drilling cuttings in drilling industry .

Vertical Cuttings Dryer
Vertical Cuttings Dryer








In order to meet the international emission standards and environmental requirements. Kosun vertical dryer can cut down drilling costs and lessen environmental pollution by recycling mud in cuttings.
Processing capacity of 40-60T / h, after treatment of cuttings oil content (OOC) can be reduced to 5% (w / w) the following,

By using VERTI-G Cutting Dryer equipment,98% customers is very satisfied with the results.

How does the vertical cutting dryer work?
The vertical cutting dryer uses solid forces generated through mechanical rotation to separate solids and liquids. The drilling chips enter the space between the sieve basket and the scraper through the feed port and the fabric cone, and the drilling fluid flows through the material layer and the sieve into the collection tank along the cap under centrifugal force. The fluid is then discharged from the outlet pipe on both sides and the solids remain in the basket.

Due to the difference in speed between the screw blade and the sieve basket, the screw blade cuts the solid from the basket and then pushes it to the bottom of the basket so that the dewatered solids are continuously discharged into the collection funnel. The liquid phase will be further processed by Decanter Centrifuge Kosun also has it availalbe.

Kosun has more than 20 years experience in Drilling Solids Control Equipment and Drilling Waste Management Equipment with API, IADC, ISO and CE certificated.

KOSUN has been highly welcomed by customers by virtue of its high-quality products and best services. Welcome to contact with us.

HI-G Cuttings Dryer Function of Kosun in Drilling Mud Fields

VERTI-G Cutting Dryer

VERTI-G cutting dryer is a very important instrument in management of drilling waste. Management of waste can be very crucial as it can cause a heavy damage to nature as well as can be very costly.

With the help of a VERTI-G cuttings dryer you get a very solid system to take care of all the drilling waste and can give you effective and cost efficient system.


VERTI-G Cutting Dryer
VERTI-G Cutting Dryer

Using a VERTI-G Cuttings Dryer in the system is very important as if you do not use it then a lot of additional work needs to done for the purpose of pumping the oil and taking care of the solids.

If the VERTI-G Cuttings Dryer is used then it can decrease the work load on VFD centrifuge and shale shaker and provide a quick turnaround. It will not only decrease the work load but will also make sure that there is no additional pressure on the shaker and centrifuge which will keep them in good shape and make sure that you get top output.

The basic functioning of a cutting dryer is not only to protect the drilling area but also make sure that there is less wastage of oil and drilling fluids. They will make sure that the degasser, mud cleaner, centrifuge and shaker are not pressurized and a good output is ensured.

If the dryer is in good condition and is used efficiently then it can not only provide better working efficiency but will also be instrumental in decreasing the pressure of all the other equipments. They will guarantee that there is better productivity to the system and that you have a very good working in place.

With reduction in release of oil, vertical dryer can also be effective in protecting the environment as releasing oil can make the field barren and cause a lot of damages.

Oilfield Drilling Waste Cutting Dryer of Kosun

Cutting Dryer

Cutting dryer that is to reduce the total volume of drill cutting and decrease the overall wastage. it will help in recovering the cutting fluids and result in a very cost effective way of enhancing the overall performance of the system.

Most of the operators are looking for ways to save up on the oil based or synthetic based drilling fluids to make the overall operation more cost efficient and environment friendly. To achieve this objective, using a cutting dryer can be very efficient as it can carry out the overall function in a very efficient manner without resulting in a lot of waste of cutting fluids.

vertical cutting dryer
Vertical cuttings dryer

Normal dryers will require you to have better collection systems, and increased man power to make sure that you get the most out of the working. For the purpose of cutting for a dryer which is located in the cutting area there can be a lot of degradation of cutting before the dryer actually reaches the dryer. If the cutting breaks down then bigger cutting surface can make recovery of the fluid less efficient and cause a lot of problems. This can also increase the total volume of the waste material which needs to be decomposed. All these factors can make the complete economic of the fluid recovery less efficient as many big equipments are needed to keep the system working.

Getting a good cutting dyer is very important as it can ensure that you get the best working for all your tools. Cutting dryer cannot just result in better productivity by can also make the system a lot more environment friendly. When there is good recycling in process then overall need of the drilling fluids will naturally decrease and you will have a better system in place that can carry out more efficient work.

The full range of Solids Control Equipment includes decanter centrifuge , shale shakershaker screen , mud cleaner, poorboy degasser, pumps, mud tank system and etc. Vertical centrifuge and the related screw pump and screw conveyor are under our drilling waste management equipment business scope.

We are looking forward to cooperation with you.

VERTI-G Cuttings Dryer For Sale From Kosun Solids

VERTI-G Cuttings Dryer

VERTI-G cuttings dryer are also called as centrifuge, are efficient solid-liquid separation equipments, from the feed device, washing equipment,filter silo,separation system, transmission,  and electronic control devices.

VERTI-G cuttings dryer are the core equipment for drilling waste management unit, which are the necessary part for drilling environment protection projects.

VERTI-G cuttings dryer for sale
VERTI-G cuttings dryer

There are two different types of Kosun vertical cutting dryer , the VC-800 cutting dryer and the VC-1000 vertical cutting dryer, all using high-speed vertical centrifuges for maximum liquid / solid separation in large quantities; it is used with Solvedrilling The dryer is the same. With new design and high quality assurance, the WestPetro cutting dryer offers key advantages for operators to meet the stringent environmental conditions of cutting and oil drilling.

The VERTI-G cutting dryer has the most advanced design and can handle a different amount of cutting and fluid, usually up to 60 tons per hour. The dried solids discharged from the dryer are usually wetted by ≤ 5% of the oil content.

By recycling mud in cuttings, vertical dryer can decrease drilling costs and lessen environmental pollution. Processing capacity of 40-60T / h, after treatment of cuttings oil content (OOC) can be reduced to 5% (w / w) the following, Meet for international emission standards and environmental requirements. Vertical centrifuges can also be used for drilling waste management on land and offshore drilling waste.

We manufacture Vertical Cutting Dryer Equipment and Drilling Waste Management Equipment for more than 20 years experience with API, IADC, ISO and CE certificated.

Kosun will integrate global resources, embark on the Chinese market, provide a full range of one-stop oil drilling fluid solid control products and waste treatment products, solutions and a high sense of responsibility and sustainable innovation services, employees, customers and shareholders, and Customer satisfaction for the KOSUN people’s eternal pursuit.

In 2017, KOSUN will continue to make a stage pose with a series of typical products we are expecting your visit!


Vertical Cutting Dryer Ideal Chosen From Kosun Manufactures

Vertical Cutting Dryer

Vertical cutting dryer can reduce drilling costs and reduce environmental pollution. Processing capacity of 40-60 tons / hour, drilling cutting oil (OOC) after treatment can be reduced to less than 5% (w / w), in line with international emission standards and environmental requirements.

Vertical cutting dryer can improve overall cost-effectiveness and reduce extreme dry chips for handling and recycling valuable fluids for reuse. It is effective for water, oil and synthetic base drilling fluids.

Up to 95% of the drilling fluid can be recovered using vertical dryer from Kosun Industries. A significant reduction in the attraction between liquid and oil results in the distillation of the vertical cutting dryer chip, which can range between 6 wt.

vertical cutting dryer
vertical cutting dryer

Kosun Industries is aimed to reduce the amount of solid waste in the drilling process and reducing the associated disposal costs. Proper use of the vertical dryer ensures that the customer complies with local environmental regulations and helps recover the base fluid. Kosun Industries has set the industry standard for reducing drill-down fluid discards in sample testing. Reduce waste, dispose of and recycle liquids, and reduce our customers’ operating costs.

Vertical cuttings dryer of Kosun Industries features is durable and functional maintenance features to reduce downtime. All standard parts are easily accessible from the top of the unit. The belt can be quickly replaced without removing the drive assembly, and the drive assembly itself can be easily removed.

Environment and cost
1.  Highly efficient liquid / solid separation minimizes chip fluid content
2. Reduce waste disposal
3. Effective separation and recovery of high percentages of fluids can be reused in active sludge systems
4. It is cost-effective to recover the entire slurry lost from mudstone vibrator failure, rig motion and screen blockage.

Features and Advantages of Cutting Dryers
1.Reasonable structure
2.long lasting
3.Easy to maintain
4.Reliable lubrication

5. Save greater energies
6.Economic and environmental protection

With many years of experience in the market, the company has been in the global market expansion, and GAZPROM, PEMEX, AVA, SOCAR, SAE, such as the establishment of friendly and cooperative relations.

From drilling solids control to drilling waste management, Kosun has the equipment and personnel to perform this work efficiently and efficiently, as well as the growing environmental problems. Kosun works with a number of professional organizations to ensure effective and accurate results in the field of environmental protection.

Vertical Cutting Dryer for Sale is Ideal Chosen From Kosun Manufactures.Vertical cutting dryer of Kosun at home and abroad and got well recognized by clients.

Vertical Dryer – High Quality Guarantee on Application

Vertical Dryer

Vertical dryer can als be considered a vertical centrifuge. The discharged cutting material is transferred from the top opening to the vertical cutting dryer by the centrifugal force generated by the rotation of the screen module by the screw conveyor.

vertical dryer
vertical dryer

The Koson Cutting Dryer consistently produces as little as 1% of the oil remaining in the weight of the cut. Centrifuges are used for separation, such as to enrich nuclear fuel for fissile isotopes.


a. Adopting Italy integrated analysis technology to meet the domestic and foreign customers on the drilling site processing requirements
b. Capacity of up to 50 tons.
c. Separate and dry different types of drilling waste, such as water-based mud, oil-based mud, compound mud.
d. The use of independent oil lubrication and cooling systems to extend equipment life.
f. Flexible discharge port, you can use different models, such as screw, belt and so on.
g. Water-based mud and composite mud: water content of 8-10%, oil-based mud: water content ≤ 6%, OOC ≤ 3%.

More stringent chip discharge regulations force operators and drilling contractors to reduce drilling waste and recycle quality products for reuse.
Cutting dryer with the most advanced design, can handle a different number of cutting and fluid, usually up to 60 tons per hour. The dry solids discharged from the dryer typically contain an oil content of & lt; 5% by wet weight.
Low costs
Cuttings dryer increase the overall cost-effectiveness, resulting in a reduced amount of extremely dry chips for disposal and recovery of valuable fluids for reuse. It is effective for water, oil and synthetic drilling fluids.

Vertical cuttings dryer for sale with low price, high-quality vertical dryer is welcomed by customers. As top  of in China’s solids control, We will continue to provide high quality produts and best services.

Please welcome to contact Kosun company to get more detail information. We are wating for your cooperation.