Kosun’s vacuum degasser is a special equipment used to process gas cut drilling fluid.

Kosun’s vacuum degasser is a special equipment used to process gas cut drilling fluid.It is suitable for all kinds of supporting equipment and plays an important role in restoring mud weight, stabilizing mud viscosity and reducing drilling cost.At the same time, it can also be used as a high-power agitator.

Vacuum degasser used vacuum pump suction effect, cause negative pressure zone in a vacuum tank, mud under the action of atmospheric pressure, through the suction pipe into the hollow shaft of rotor, again by the window around the hollow shaft, the jet shaped into the tank wall, due to the collision and separating the role of the wheel, to separate the drilling fluid into a thin layer of mud invasion of bubble, gas evolution, through vacuum pump suction and the separation of gas water separator, the exhaust pipe line to the safety of gas by the separator, the mud by the impeller discharge outside the tank.Since the main motor is started first, the impeller connected to the motor is in a state of high-speed rotation, so the mud can only enter the tank from the suction pipe, not from the discharge pipe.

Features and advantages of corun’s vacuum degasser in drilling operation:

1.Self-priming devices do not require centrifugal pumps to attack drilling mud

2.Eliminates corrosion and reduces repair and maintenance costs

3.Compact design and small footprint

4.The suction pipe is inserted into the mud tank and can be used as a high-power agitator under the condition of no gas cut in the mud

5.Mud through the window of the rotor to tell the four walls, mud bubbles broken thoroughly, degassing effect is good.

Kosun- China Solids Control Leader&Drilling Waste Management Expert

Tel.: +86 29 87304914

Email: sales2@adkosun.com

Contact person: Jinbo Zheng

Contact person: Jinbo Zheng

http://www.kosun.com

http://www.kosuneco.com

Leave a Reply

Your email address will not be published.